Key takeaways
- The best lumbar traction devices compared: a pneumatic ComforTrac kit, two traction benches, a door-anchored strap and an inflatable decompression belt.
The best lumbar traction device for most homes is a pneumatic kit with a force gauge, because it lets you set, repeat and release a measured pull instead of guessing. On that basis the ComforTrac Lumbar Traction Kit leads this list: its hand pump displays traction force in pounds and kilograms, it delivers up to 200 pounds of force, and a quick-release valve dumps the pressure instantly. If you would rather stretch on a bench, the Exerpeutic 100 traction table and the Stamina InLine Back Stretch Bench use cranks and levers rather than air pressure. The Fisher Traction back device packs a door-anchored strap system into a carry bag for travel, and the 6xigouma decompression belt trades the floor for a wearable inflatable design you can use standing, walking or driving.
Every device below is a home lumbar traction product sold for lower back discomfort linked to herniated or degenerated discs, muscle spasm and sciatica-type symptoms. None of them is a substitute for a diagnosis. Traction is not appropriate for every spine, so read the safety notes before ordering, and talk to your clinician if you have a diagnosed condition.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- Quick Picks at a Glance
- How to Choose a Lumbar Traction Device
-
- ComforTrac Lumbar Traction Kit
-
- Exerpeutic 100 Back Stretch Traction Table
-
- Fisher Traction Back Device (Under 230 lbs)
-
- Stamina InLine Back Stretch Bench
-
- 6xigouma Decompression Back Belt
- Checks and Safety Notes
- FAQ
- Conclusion
- Product and ASIN Reference
Quick Picks at a Glance
| Product | Type | Tier |
|---|---|---|
| ComforTrac Lumbar Traction Kit | Pneumatic unit with gauge | Premium |
| Exerpeutic 100 Back Stretch Traction Table | Crank traction bench | Mid-range |
| Fisher Traction Back Device (Under 230 lbs) | Door-anchored strap | Mid-range |
| Stamina InLine Back Stretch Bench | Lever traction bench | Budget |
| 6xigouma Decompression Back Belt | Inflatable belt | Budget |
How to Choose a Lumbar Traction Device
Start with the mechanism, because it decides how controlled the stretch feels. Pneumatic units use a hand pump, and the better ones show the force on a gauge, so a session can be repeated at the same setting day after day. Crank and lever benches extend a sliding section of the bench; the stretch is smooth and entirely manual, with no gauge, so you judge it by feel. Door-anchored straps create intermittent traction: you pull, hold and release in cycles, which some clinicians prefer for disc work. Inflatable belts are the gentlest option here, lifting the torso vertically while you stay upright and mobile, but they cannot match the pull of a floor unit.
Force is the second filter. Clinical-style home units are rated up to about 200 pounds of traction force, yet manufacturer guidance is consistent on one point: start far below the maximum, increase slowly over sessions, and stop if pain travels further down the leg. A quick-release control matters more than raw force, because it lets you end a session instantly if the stretch feels wrong.
Fit comes third. Benches and pneumatic units publish user weight capacities, strap systems publish a weight limit for the version you buy, and belts are sized by waist measurement taken at the navel rather than by trouser size. Finally, consider storage. The pneumatic kit folds into a trolley case, the strap kit fits in a carry bag, the belt rolls up in a drawer, and the benches need a wall, a closet or the space under a bed.
1. ComforTrac Lumbar Traction Kit
The ComforTrac is the closest thing in this roundup to the traction setup used in a clinic. You lie on the hinged unit, fasten the contouring upper and lower belts, and work a patented hand pump. The pump gauge displays the traction force in both pounds and kilograms, and the unit is rated to a maximum of 200 pounds of force. An automatic carriage return slides the moving section back when you release pressure, and the pump carries a quick-release valve that vents the system at once if you want out.
Comfort details are a step above the rest of the field: the headrest is memory foam, the traction bed is cushion foam, and the hinged frame needs virtually no setup out of the case. The maker states the design was durability tested through 5,000 cycles, which it equates to three sessions a day for five years. The kit is made in the USA and ships with a trolley-style carrying case, so a fairly large device stays portable. The trade-offs are size and cost tier: this is the premium pick, it is the bulkiest product here, and because it is sold through a specialist marketplace seller rather than a mass listing, stock is worth confirming on the product page before you plan around it.
Specs
- Type: Pneumatic horizontal lumbar traction unit, used lying down
- Maximum traction force: 200 lb
- Force control: Hand pump with gauge showing pounds and kilograms; quick-release valve
- Fit system: Contouring adjustable upper and lower belts
- Design: Hinged no-setup frame; automatic carriage return
- Surfaces: Memory foam headrest; cushion foam traction bed
- Included: Traction unit, hand pump with gauge, trolley carrying case, user instructions
- Origin: Made in USA
- Dimensions: Not stated in the listing data reviewed
- Weight: Not stated in the listing data reviewed
2. Exerpeutic 100 Back Stretch Traction Table
The Exerpeutic 100 takes the opposite approach to the ComforTrac: no air, no gauge, just a steel traction bench and a hand crank. You lie on the bench, secure yourself, and turn the traction wheel to extend the sliding section, which stretches the lower back in small, controlled increments. Because the mechanism is a screw-driven wheel rather than a lever, the stretch builds gradually and holds at whatever point you stop cranking, which suits users who find pump-based force hard to judge.
The frame is rated for users up to 350 lb, the highest capacity in this roundup, and the bench adjusts to user height. Storage is the other strong point: the unit sits only about 7 inches high when put away, so it slides under most beds instead of living in the middle of a room. It is finished in blue and black. What you give up versus the pneumatic kit is measurement: there is no force readout, so progress is tracked by crank turns and feel, and the bench is a dedicated piece of floor furniture while it is set up.
Specs
- Model: 4510
- Type: Non-inversion traction bench, used lying down
- User weight capacity: 350 lb
- Mechanism: Hand-crank traction wheel extending the bench section
- Frame: Steel
- Height adjustment: Adjustable to user height
- Storage height: About 7 in when put away
- Finish: Blue and black
- Dimensions: Not stated in the listing data reviewed
- Weight: Not stated in the listing data reviewed
3. Fisher Traction Back Device (Under 230 lbs)
Fisher Traction replaces the bench with a door. The system loops over a standard doorknob, you lie on the floor in the harness, and a patented Release Strap lets you run intermittent traction: pull to stretch, release to rest, in the pump-and-hold rhythm the design is built around. Fisher calls the geometry Negative G-Force technology, and the device was developed by Dr. Jeff Fisher, a chiropractor with more than thirty years in practice. It is an FDA-cleared Class I medical device and is patented in the United States.
This version is the under-230-lb model; a separate version exists for users over that limit, so match the listing to your weight before ordering. Portability is the headline: the device itself weighs under a pound, and at roughly 2.1 lb packed in its carry bag it is the only true travel option in this roundup. The kit includes inflatable knee supports, which flex the hips slightly and take strain off the hamstrings during a session. The limits are equally clear: it works only where a suitable door and floor space exist, the 1-inch nylon straps need careful positioning, and the pull is controlled entirely by your own arm, so disciplined, gentle cycles matter.
Specs
- Type: Door-anchored strap traction, used lying on the floor
- User weight limit: Under 230 lb for this version
- Mechanism: Patented Release Strap; intermittent pull-and-release cycles
- Anchor: Standard doorknob
- Straps: Nylon, 1 in wide
- Included: Traction device, inflatable knee supports, carry bag
- Device weight: Under 1 lb; about 2.1 lb packed
- Regulatory: FDA-cleared Class I medical device; US patented
- Dimensions: Not stated in the listing data reviewed
4. Stamina InLine Back Stretch Bench
Stamina’s InLine bench is the long-running budget route into bench traction. You lie on the padded bench, secure your ankles, and work a lever that draws the bench sections apart, stretching the lower back without inversion and without hanging from your ankles. The movement is entirely manual, so intensity is set by how far you move the lever, and the padded supports keep the body aligned while you do it.
The bench is rated for users up to 250 lb, noticeably less than the Exerpeutic, and it is a full-length piece of equipment at 72 inches assembled, so plan a permanent spot or a generous closet. Stamina publishes a product weight of 20.25 lb, light enough to move between rooms. The warranty is one year on the frame and 90 days on parts, which is stated plainly by the maker and worth noting at this tier. Like the Exerpeutic, there is no force gauge; unlike the Exerpeutic, the lever action is quicker to engage but coarser, so small adjustments take a little practice.
Specs
- Type: Non-inversion decompression bench, used lying down
- User weight limit: 250 lb
- Mechanism: Manual lever traction with padded supports and ankle supports
- Assembled length: 72 in
- Product weight: 20.25 lb
- Warranty: 1 year frame, 90 days parts
- Model number: Not stated in the listing data reviewed
- Assembled width and height: Not stated in the listing data reviewed
5. 6xigouma Decompression Back Belt
The 6xigouma belt is the wearable end of the category. It wraps around the waist, fastens with a 360-degree waist lock, and inflates through a hand pump. As the vertical air columns fill, the belt grows taller, bracing between the rib cage and the hips and lifting part of the upper body’s load off the lumbar spine. Because you wear it upright, traction happens while you stand, walk, sit or drive, which no floor device here can offer.
One size covers waists from 29 to 49 inches, measured around the navel, and an extension piece is included for the upper end of that range. The shell is polyurethane with a cotton lining, and eight ventilation holes help with heat during longer wear. The honest limitation is force: an inflatable belt delivers a gentle vertical lift, not the measured pull of the ComforTrac or the mechanical stretch of a bench, and its own listing is explicit that it must not be used with fractures of the thoracic, lumbar or sacral vertebrae, the pelvis or the ribs. As a first step into traction, or as support during daily activity, it is the simplest and most affordable format here.
Specs
- Model: XGM-102R
- Type: Inflatable lumbar traction belt, worn upright
- Fit: Waist 29 to 49 in, measured at the navel; extension piece included
- Mechanism: Vertical air columns inflated with the included hand pump
- Closure: 360-degree waist lock
- Materials: Polyurethane shell; cotton lining
- Ventilation: 8 ventilation holes
- Color of this listing: Beige
- Weight: Not stated in the listing data reviewed
- Dimensions: Not stated in the listing data reviewed
Checks and Safety Notes
Recall check: none of the five products above is named in a CPSC or FDA recall located for this category. The nearest category record is an FDA Class 2 recall, Z-2326-2024, initiated in April 2024 by Pivotal Health Solutions for its Decompression of Choice powered decompression table, model E9011, a clinical table recalled over a lumbar frame part. It is a practitioner table, not a home device and not one of the picks, but it is a useful reminder to check any traction product’s exact model against the FDA recall database and saferproducts.gov before buying, and to inspect frame hardware on benches and tables when they arrive.
Contraindications come straight from manufacturer guidance for this device class. Do not use lumbar traction if you have a spinal fracture, severe osteoporosis, spinal instability, implanted spinal hardware or a fusion, or if you are recovering from recent spinal surgery. Maker guidance for the pneumatic kit also lists diabetes, heart disease, spinal stenosis, lumbar spondylolisthesis, acute illness and pregnancy as reasons to get a clinician’s approval first, and the belt listing bars use with rib or pelvic fractures as well. Evidence note: traction research is mixed, and international guidelines do not recommend routine traction for non-specific chronic low back pain, so treat these devices as one tool alongside exercise and clinical advice, not as a cure. Start at the lowest force or gentlest setting, keep early sessions short, and stop and release the pressure at once if pain shoots further down the leg, or if numbness or weakness appears.
FAQ
How much traction force should a beginner start with?
Start far below the maximum. On a gauged pneumatic unit, begin at a low force you can barely feel, hold it briefly, and add a little over separate sessions rather than within one session. On benches, straps and belts, the equivalent rule is a gentle stretch that never becomes pain. Manufacturer guidance across this category is consistent: force is built up over days and weeks, and the quick-release, lever or valve should always be within reach before you begin.
Who should not use a lumbar traction device?
Anyone with a spinal fracture, severe osteoporosis, spinal instability, spinal hardware or a recent spinal operation should not use one. Manufacturer contraindication lists for this category also flag pregnancy, acute illness, and conditions such as stenosis and spondylolisthesis as cases that need a clinician’s decision first. If your pain follows an accident, or comes with numbness, weakness or bladder changes, skip home traction and get assessed in person.
What is the difference between a pneumatic kit, a bench, a door strap and a belt?
A pneumatic kit applies a measured, gauge-read pull while you lie down, which makes sessions repeatable. A bench stretches you mechanically with a crank or lever, with no gauge, so you work by feel. A door strap gives intermittent pull-and-release cycles and packs away to almost nothing. A belt inflates around your waist and lifts gently while you stay upright and mobile, trading maximum force for wear-anywhere convenience.
How long should a home traction session last?
Published guidance for the pneumatic kit in this roundup puts treatment time at about 10 to 15 minutes, and that is a sensible ceiling for the other floor devices too. Beginners should start with shorter sessions of a few minutes and build up only if the following day feels no worse. Belts are worn for longer periods during activity, but should be deflated periodically rather than worn inflated all day.
Conclusion
For measured, repeatable home traction, the ComforTrac Lumbar Traction Kit is the strongest pick here: a 200-pound pneumatic range, a gauge that reads in pounds and kilograms, and an instant quick release. The Exerpeutic 100 is the bench to choose for higher user capacity and under-bed storage, while the Stamina InLine covers the same bench idea at a budget tier and a lower weight limit. Fisher Traction is the travel and small-space answer, provided your weight matches the version you order. The 6xigouma belt is the gentlest option and the only one that works while you are up and moving. Whichever format fits your routine, confirm the fit limits, respect the contraindications, and start gently.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Collect the home and kitchen items you want in one registry that guests can shop from.
Create a wedding registrySet up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.
Explore Subscribe & SaveFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!